Okuma Salina SA Spin Reel

Specifically designed for saltwater use, the Salina spinning reels feature Okuma’s rigid LITECAST construction design, Dual Force Drag System for extreme stopping power and our proprietary High Density Gearing with a special corrosion resistant coating. Combine this with a high-speed gear ratio and a customized aluminium handle and you have one of the best saltwater fishing reels on the market.

Carbonite High Output Dual Force Drag (DFD) System
DFD incorporates both surfaces of the spool to maximize high-end drag pressure, efficiency and overall smoothness. Mounted in the top of the spool and protected by the Hydro Block system is a multi-disc carbon drag system that works in conjunction with a secondary drag system that is mounted under the spool. Even pressure is applied to both surfaces of the spool for maximum stability and significantly Increased drag output compared to traditional single drag systems.

Diamond-Like Carbon (DLC): Even Flow Roller System With DLC Coating
The EFR II with DLC coating greatly reduces line friction allowing the fishing line to run more smoothly over this smooth surface, prolonging the life of the fishing line and the prevention of line twist.

Gearing Stabilization Design
Ultimate pinion stability for prefect main gear adjustment: super smooth gearing feeling and high durability.

High Performance Bearing (HPB)
6 high performance ball bearings provide the Salina reels with outstanding smoothness and reliability in saltwater fishing environments. The balls used on the HPB’s are constructed from the same high-grade stainless steel material as the bearing housing.

Features

– Rigid and corrosion resistant LITECAST construction
– Carbonite high output Dual Force Drag (DFD) System with Cal’s drag grease
– Multi-disc drag adjustment for more precise settings
– Even Flow Roller System with DLC coating
– Gear stabilization design
– 6HPB + 1RB corrosion resistant stainless-steel bearings
– CRC: Corrosion resistant coating process
– Dual anti-reverse: Quick-Set and ratchet system
– HDGII: Corrosion resistant, High density gearing II
– Precision machine cut brass pinion gear
– Manual bail trip function for ultimate reliability
– Machined aluminium, 2-tone anodized spool
– Machined aluminium, screw-in handle
– Machined aluminium, 2-tone anodized round knob

Specifications

– Model: SA-4000HA
– Gear Ratio: 5.8:1
– Bearings: 6HPB+1RB
– Weight(g): 405
– Line Retrieve (cm): 90
– Max Drag (Kg): 15
– Mono Line Capacity (mm): 0.25/280 0.30/185 0.35/130

– Model: SA-5000HA
– Gear Ratio: 5.8:1
– Bearings: 6HPB+1RB
– Weight(g): 422
– Line Retrieve (cm): 95
– Max Drag (Kg): 15
– Mono Line Capacity (mm): 0.30/240 0.35/170 0.40/125

– Model: SA-6000HA
– Gear Ratio: 5.8:1
– Bearings: 6HPB+1RB
– Weight(g): 428
– Line Retrieve (cm): 101
– Max Drag (Kg): 15
– Mono Line Capacity (mm): 0.30/315 0.35/220 0.40/165

– Model: SA-8000HA
– Gear Ratio: 5.8:1
– Bearings: 6HPB+1RB
– Weight(g): 650
– Line Retrieve (cm): 103
– Max Drag (Kg): 20
– Mono Line Capacity (mm): 0.40/230 0.45/180 0.50/140

– Model: SA-10000A
– Gear Ratio: 5.8:1
– Bearings: 6HPB+1RB
– Weight(g): 666
– Line Retrieve (cm): 112
– Max Drag (Kg): 20
– Mono Line Capacity (mm): 0.40/290 0.45/220 0.50/175

– Model: SA-14000HA
– Gear Ratio: 5.8:1
– Bearings: 6HPB+1RB
– Weight(g): 668
– Line Retrieve (cm): 116
– Max Drag (Kg): 20
– Mono Line Capacity (mm): 0.40/370 0.45/290 0.50/230